Who doesn't love Ghostbusters? Not only does the film perfectly combine humor with horror, but it hosts some of movie history's most memorable and groundbreaking practical FX. Chronicle Collectibles presents the ultimate licensed Ghostbusters Terror Dog Replica. Rotocast in resin, hand-painted like the actual filming puppet, the Keymaster (horn tips point up) and the Gatekeeper (tips point down) are now available for sale. Cast from the original FX mold, the same mold that birthed the rubber puppets used in the film, the prototype was restored by Kristina Lucas Francis and approved by the original sculptor, Randall William Cook. The Terror Dog stands on its own four feet, and requires no base. Measures 24' long, 12' wide, and 11' tall. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 630,00
Prezzo HoVistoCose: EUR 861,84
Pagina del Previews (DEC/2014): 475
Data di uscita: 25/02/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
If you've seen the 1987 version of RoboCop starring Peter Weller, you likely remember ED-209. A prototype urban-assault combat warrior produced by OCP (Omni Consumer Products), ED-209 first appears in the mega-corporation's boardroom, where a malfunction causes it to unfortunately and violently kill a board member. It's this seminal event that shifts OCP's strategy to produce an experimental cyborg design - RoboCop. Chronicle Collectibles is proud to bring you the RoboCop: ED-209 Replica, signed by Phil Tippett and molded by Tippett Studio from original masters and an actual puppet used on-screen in the film. This statue stands 14 1/2' tall with base. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 1500,00
Prezzo HoVistoCose: EUR 2052,00
Pagina del Previews (DEC/2014): 476
Data di uscita: 25/02/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
The true star of Lost in Space! Built at a large 1/6-scale, the Robot will match your Lost in Space action figures! Extremely detailed, the kit contains styrene, photoetch, and blowmolded parts for an accurate finished model. Paint and glue required. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 54,99
Prezzo HoVistoCose: EUR 70,52
Pagina del Previews (DEC/2014): 476
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
Hollywood Collectibles presents the Rambo Knives Masterpiece Collection, the finest officially licensed Rambo knives ever produced. No detail has been spared to make these knives the most accurate and highest quality licensed Rambo knives ever made. Featured prominently in First Blood, this is an exact reproduction of the knife used by Sylvester Stallone in this classic action movie. Each knife measures 14' in overall length and features a top quality 420 stainless steel blade with slotted saw teeth, a hollow handle with survival kit, aluminum butt cap with precision compass and a double screwdriver guard. This knife is available in either a standard edition or the Sylvester Stallone Signature Edition with an authentic reproduction of Stallone's signature, produced in a limited edition of 10,000 pieces. This museum quality replica has been hand crafted with pride from the finest materials available and comes complete with a high quality buffalo hide leather sheath. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 149,95
Prezzo HoVistoCose: EUR 192,30
Pagina del Previews (DEC/2014): 476
Data di uscita: 25/02/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
Hollywood Collectibles presents the Rambo Knives Masterpiece Collection, the finest officially licensed Rambo knives ever produced. No detail has been spared to make these knives the most accurate and highest quality licensed Rambo knives ever made. Featured prominently in First Blood, this is an exact reproduction of the knife used by Sylvester Stallone in this classic action movie. Each knife measures 14' in overall length and features a top quality 420 stainless steel blade with slotted saw teeth, a hollow handle with survival kit, aluminum butt cap with precision compass and a double screwdriver guard. This knife is available in either a standard edition or the Sylvester Stallone Signature Edition with an authentic reproduction of Stallone's signature, produced in a limited edition of 10,000 pieces. This museum quality replica has been hand crafted with pride from the finest materials available and comes complete with a high quality buffalo hide leather sheath. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 169,95
Prezzo HoVistoCose: EUR 217,95
Pagina del Previews (DEC/2014): 476
Data di uscita: 25/02/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
Sylvester Stallone is Rambo, and has made this character not only an icon of American culture, but also a symbol of American jingoism. Hollywood Collectibles presents the Rambo Knives Masterpiece Collection, the finest officially licensed Rambo knives ever produced. No detail has been spared to make these knives the most accurate and highest quality licensed Rambo knives ever made. Each knife measures 15 1/2' in overall length and features a top quality 420 stainless steel blade with slotted saw teeth, a hollow handle with survival kit, aluminum butt cap with precision compass and a double screwdriver guard. Available in a Standard Edition, the knife is also available in a Sylvester Stallone Signature Edition, featuring an authentic reproduction of Stallone's signature and limited to just 10,000 numbered pieces. This museum quality replica has been hand crafted with pride from the finest materials available and comes complete with a high quality buffalo hide leather sheath. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 159,95
Prezzo HoVistoCose: EUR 205,13
Pagina del Previews (DEC/2014): 476
Data di uscita: 25/02/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
Sylvester Stallone is Rambo, and has made this character not only an icon of American culture, but also a symbol of American jingoism. Hollywood Collectibles presents the Rambo Knives Masterpiece Collection, the finest officially licensed Rambo knives ever produced. No detail has been spared to make these knives the most accurate and highest quality licensed Rambo knives ever made. Each knife measures 15 1/2' in overall length and features a top quality 420 stainless steel blade with slotted saw teeth, a hollow handle with survival kit, aluminum butt cap with precision compass and a double screwdriver guard. Available in a Standard Edition, the knife is also available in a Sylvester Stallone Signature Edition, featuring an authentic reproduction of Stallone's signature and limited to just 10,000 numbered pieces. This museum quality replica has been hand crafted with pride from the finest materials available and comes complete with a high quality buffalo hide leather sheath. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 169,95
Prezzo HoVistoCose: EUR 217,95
Pagina del Previews (DEC/2014): 476
Data di uscita: 25/02/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
Proudly display your favorite books or CDs with this set of bookends based on the iconic sculptures from the cover of Pink Floyd's classic album, The Division Bell! Each measures 8' tall x 4' wide x 2' deep and is perfectly weighted for keeping books in place. Made of hand-painted resin with subtle metallic accents. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 49,99
Prezzo HoVistoCose: EUR 64,11
Pagina del Previews (DEC/2014): 477
Data di uscita: 28/01/15 (può ritardare di 30 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Mighty Fine! 'A Night Mare' vinyl is designed by the very talented Sajira, and captures Nightmare Moon in all her glory. Her delicate features and fierce majesty are perfectly detailed, and her mane and tail feature a shimmery pearl finish, as though the moon's light always shines on her. This statue stands 5 1/2' tall. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 28,00
Prezzo HoVistoCose: EUR 35,91
Pagina del Previews (DEC/2014): 477
Data di uscita: 28/01/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Mighty Fine! Designed by Mighty Fine Artists program member Sajira, based on her best-selling t-shirt design of the same name, this statue depicts Equestria's coolest DJ unicorn breakin' it down on the dance floor. The figure stands 4 1/2' tall. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 25,00
Prezzo HoVistoCose: EUR 32,06
Pagina del Previews (DEC/2014): 477
Data di uscita: 28/01/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Mighty Fine! Designed by Mighty Fine Artists program member Karol Pawlinski, this figure stands 5 3/8' tall. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 25,00
Prezzo HoVistoCose: EUR 32,06
Pagina del Previews (DEC/2014): 478
Data di uscita: 28/01/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Mighty Fine! Designed by Mighty Fine Artists program member Sajira, Twilight Sparkle stands triumphant in her dystopian future! The figure stands 6 1/4' tall. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 25,00
Prezzo HoVistoCose: EUR 32,06
Pagina del Previews (DEC/2014): 478
Data di uscita: 28/01/15 (può ritardare di 60 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
AMT's Chevy 'Crunch' Monster Truck is all about fun in model building. This easy-to-assemble kit is molded in three colors so no painting is required. The snap-together parts let young or inexperienced modelers build a great looking model in a short time. The kit includes a full-color Nestle Crunch sticker sheet to add the finishing touch. Molded in blue, black, and white. 1/32-Scale, Level 1, no paint or glue required. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 24,99
Prezzo HoVistoCose: EUR 32,05
Pagina del Previews (DEC/2014): 478
Data di uscita: 25/02/15 (può ritardare di 30 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
AMT's full-size Piranha CRV Super Spy Car was seen weekly on the Man from UNCLE television series in the 1960s. The feature-packed kit will include a bonus booklet with vintage photos of the car, optional tinted windows, a newly-developed decal sheet, and much more! Molded in metallic blue, the car is 1/25-scale and Skill Level 3, requiring both paint and glue. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 27,99
Prezzo HoVistoCose: EUR 35,90
Pagina del Previews (DEC/2014): 478
Data di uscita: 25/02/15 (può ritardare di 30 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
Mention the 1950's to an American car fan and most will immediately recall the fins on a 1957 Chevrolet. Revell's new Easy Kit version of this timeless classic allows even those with a minimum of time or building experience to assemble a replica you'll be proud to display on your shelf or in your office. Features: Snap construction to eliminate the need for glue, color-molded parts, and large diameter custom wheels with low profile tires. Skill Level 1-paint and glue not needed. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 15,95
Prezzo HoVistoCose: EUR 20,45
Pagina del Previews (DEC/2014): 479
Data di uscita: 25/02/15 (può ritardare di 30 giorni)
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
Moebius celebrates the 50th-anniversary of Topps' Mars Attacks! trading cards with this model kit in 1/8-scale. Based on new artwork by artist Earl Norem, this kit captures the essence of the 1960s. Complete detailed base with victim, sidewalk and lamp post. The base includes grisly human remains courtesy of our Martian friends! Kit is over 9' tall when fully assembled. Skill level 3, paint and glue required for final assembly. (immagine) Categoria: Toys and models
Ordinabile fino al 02/01/15
Prezzo di copertina: USD 39,99
Prezzo HoVistoCose: EUR 51,29
Pagina del Previews (DEC/2014): 479
Final Order Cutoff: 02/01/15 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
$630,00
$1500,00
$54,99
$149,95
$169,95
$159,95
$169,95
$49,99
$28,00
$25,00
$25,00
$25,00
$24,99
$27,99
$15,95
$39,99
