From Bandai Hobby. Darth Vader returns to the 1/12-scale line with a new 'mask off' version. This model utilizes the Triaxial Jet Finish and by popular demand has a new cape recreated with soft plastic to increase posability. It comes with an alternate right arm with the hand cut off to reflect the fierce fight with Luke Skywalker. The chest parts have been recreated in a new molded design as well. Included in the model comes: Darth Vader face parts x 2, Cape parts x 2 (soft and hard cape), Cut off Right hand x 1, Chest panel x 2 (Mold Ver and Flat Ver), Lightsaber x 2 (hilt ver and lightsaber ver), Hand parts x 5, Runners x 9, Sticker sheet x 1, Water Slide Decals x 1 and Manual x 1. This is the ultimate Darth Vader model kit. (immagine) Categoria: Toys and models
Ordinabile fino al 30/11/18
Prezzo di copertina: USD 39,00
Prezzo HoVistoCose: EUR 53,35
Pagina del Previews (NOV/2018): 1105
Data di uscita: 27/02/19 (può ritardare di 60 giorni)
Final Order Cutoff: 30/11/18 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. From Star Wars: Episode V - The Empire Strikes Back, comes the AT-AT in 1/144-scale! The 4 legged mobile transport has stunning details even down to the side paneling. Recreate the memorable attack at the Battle of Hoth scene with multiple kits! Legs feature individually movable joints that can even bend low enough to recreate the massive behemoth being defeated. A nipper or sprue cutter (sold separately) is required for assembly, but does not require glue. Also includes seated pilot, part swappable landing gear options, water slide and sticker transfer options. Set includes snow themed dedicated display base. (immagine) Categoria: Toys and models
Ordinabile fino al 07/04/17
Prezzo di copertina: USD 47,63
Prezzo HoVistoCose: EUR 65,15
Pagina del Previews (MAR/2017): 586
Data di uscita: 26/04/17 (può ritardare di 60 giorni)
Final Order Cutoff: 07/04/17 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. A new refined version of the MG Gundam F91 as part of the GunPla Evolution project, from the animated movie Gundam F91! Careful research has been conducted to recreate not only the physical appearance but also its various action gimmicks including an LED housing in the chest backpack assembly (BAN217846 White LED, sold separately) for representing the heat dissipation that generates the Metal Peel-off Effect (MPE) in the anime. The F91's face open gimmick is now correctly implemented and can split open to the sides or be displayed with a solid piece. Shoulder fins and leg thrusters have a new deployment mechanisms allowing for various angle adjustments. Weapons include: Beam Rifle, Beam Sabers x2, Beam Launcher, Beam Shield, deployable VSBR units, and display base stand. Runner x18, stickers, dry decal, Instruction Manual. Display it together with RE-100 Vigna Ghina! (immagine) Categoria: Toys and models
Ordinabile fino al 01/06/18
Prezzo di copertina: USD 45,27
Prezzo HoVistoCose: EUR 61,93
Pagina del Previews (MAY/2018): 1069
Data di uscita: 25/07/18 (può ritardare di 60 giorni)
Final Order Cutoff: 01/06/18 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. Bandai brings us a new lineup of endlessly customizable, easy-to-build mecha model kits with 30 Minutes Missions (30MM)! Representing mass-produced robots, these kits are perfect for army-building and feature a common joint system so parts can easily be switched between the different types of units. Each kit builds into a highly posable figure with armor; in addition, the armor parts are equipped with hard points to attach weapons. (immagine) Categoria: Toys and models
Ordinabile fino al 31/05/19
Prezzo di copertina: USD 14,63
Prezzo HoVistoCose: EUR 20,00
Pagina del Previews (MAY/2019): 1114
Data di uscita: 28/08/19
Final Order Cutoff: 31/05/19 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. A new accessory and also stand alone series of various armed vehicles that can be combined with 30 mm models! Air Fighter version includes parts to be used as a flight pack! (immagine) Categoria: Toys and models
Ordinabile fino al 01/05/20
Prezzo di copertina: USD 9,75
Prezzo HoVistoCose: EUR 13,33
Pagina del Previews (APR/2020): 1090
Data di uscita: 29/07/20 (può ritardare di 60 giorni)
Final Order Cutoff: 01/05/20 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. A special unit used by Tatsuya Yuki from Gundam Build Fighters, this HGUC Zeta inspired Gundam features a unique weapon load out and color scheme worthy of the title, Meijin Kawaguchi. Its main armaments consist of the A Mega Rifle and Z Mega Rifle, which can combine together to form the A-Z Mega Launcher! Just like the Zeta Gundam it is based on, the A-Z Gundam is capable of transforming into a wave rider form through the use of part replacements. The Dash Shield which can be mounted on forearm and features opening for the Unlimited Saber weapon. (immagine) Categoria: Toys and models
Ordinabile fino al 09/03/18
Prezzo di copertina: USD 27,75
Prezzo HoVistoCose: EUR 37,96
Pagina del Previews (FEB/2018): 559
Data di uscita: 28/02/18 (può ritardare di 60 giorni)
Final Order Cutoff: 09/03/18 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Tamashii Nations. Next in the Ultraman Mecha Collection lineup comes the Magma Riser! Making its debut in episode 17 Underground GO! GO! GO!, the 3 3/4' tall Magma Riser looks dynamic despite being small enough to fit in the palm of your hand! Every detail in the missile launcher and jet drill has been faithfully recreated. Collect the whole collection! Runner x3. Water slide decal x1. Instruction manual (Printed on back of box). (immagine) Categoria: Toys and models
Ordinabile fino al 07/07/17
Prezzo di copertina: USD 6,98
Prezzo HoVistoCose: EUR 9,53
Pagina del Previews (JUN/2017): 600
Data di uscita: 26/07/17 (può ritardare di 60 giorni)
Final Order Cutoff: 07/07/17 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. The second son of Sun Jian, he is based on the Gundam Astray Red Frame and wields 3 swords one of which can be held by his mouth! Includes 150 Gerbera, Tiger Pierce, Gerbera Straigh swords. Compatible with the sold separately Trinity Bike! Runner x7, stickers x1, Instruction Manual. (immagine) Categoria: Toys and models
Ordinabile fino al 31/05/19
Prezzo di copertina: USD 6,75
Prezzo HoVistoCose: EUR 9,23
Pagina del Previews (MAY/2019): 1092
Data di uscita: 25/09/19 (può ritardare di 60 giorni)
Final Order Cutoff: 31/05/19 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. Kamen Rider Hibiki joins Figure-rise Standard! A thorough reproduction of the body suit from the TV show uses a newly developed 'polarization molding color' to reproduce the characteristic suit color. Reflection that changes like a gradation depending on how the light hits expresses the texture. The gradation of the mask part is reproduced by the combination of the change in the thickness of the clear parts and the sticker attached inside. The sound angle and sound attack stick (A?Tune) are molded integrally with the hand parts to express the minute expression of the fingertips holding the weapon. Clear-molded effect parts that can be reattached are included at the tip of the sound hammer and blaze. The attached drum effect can powerfully reproduce the deadly technique. Figure-rise effect pedestal X1 Sound hammer stick, sound hammer effect X 2 Sound drum effect X1 Sound angle X1 Wrist parts Decisive hand (right), dedicated sound angle hand (right), sound hammer stick Handle (left and right), open hand (left and right), handgrip (left and right) Foil seal x 1 Tetron seal x 1 (immagine) Categoria: Toys and models
Ordinabile fino al 04/09/20
Prezzo di copertina: USD 45,00
Prezzo HoVistoCose: EUR 61,56
Pagina del Previews (AUG/2020): 1069
Data di uscita: 16/12/20 (può ritardare di 60 giorni)
Final Order Cutoff: 04/09/20 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. Hiroto's new Gundam for the second season of Gundam Build Divers RE:Rise! Utilizing the Planet System, this Gundam form named after the planet Uranus includes 3 Bits, Sniper Rifle, shield, and Beam sabers as well as ability for armor to be displayed separately on a an included display stand. Other models available in this 1/144-scale series include the New Protag Armor, the Ex Valkylander, and many more! (immagine) Categoria: Toys and models
Ordinabile fino al 01/05/20
Prezzo di copertina: USD 17,25
Prezzo HoVistoCose: EUR 23,59
Pagina del Previews (APR/2020): 1076
Data di uscita: 29/07/20 (può ritardare di 60 giorni)
Final Order Cutoff: 01/05/20 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. Pocket size model kits from Star Wars: The Last Jedi. Includes Poe's Boosted X-Wing and Resistance X-Wing Fighters (1/144) and the Millennium Falcon (1/350)! Each comes with own display stand with marking stickers. (immagine) Categoria: Toys and models
Ordinabile fino al 01/12/17
Prezzo di copertina: USD 21,00
Prezzo HoVistoCose: EUR 28,72
Pagina del Previews (NOV/2017): 544
Data di uscita: 28/02/18 (può ritardare di 60 giorni)
Final Order Cutoff: 01/12/17 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai. Char Aznable's red Zaku I from High Grade Gundam: The Origin is armed with its rifle In this 1/44-scale plastic snap-fit model kit. (immagine) Categoria: Toys and models
Ordinabile fino al 06/01/17
Prezzo di copertina: USD 20,84
Prezzo HoVistoCose: EUR 28,50
Pagina del Previews (DEC/2016): 560
Data di uscita: 25/01/17 (può ritardare di 60 giorni)
Final Order Cutoff: 06/01/17 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandia Hobby. Recreate 'The Origin' worldview in full with an exclusive, limited production special edition of the MG RX-78-02 Gundam! This kit has a limited edition packaging utilizing visuals from Gundam The Rising. Use all-new parts and LED lights in two colors, pink and yellow, to recreate the different color schemes that appear in the illustrations of the original anime. Last but not least, a large-format illustration (610x460 mm) is included. Set includes beam rifle early-type, beam rifle late-type, hyper bazooka, beam saber x2, shoulder cannon, and effect part x3 types. Runner x14. LED unit x2 (pink/yellow x1 each). Tetron sticker x1. Foil sticker x1. Large-format illustration x1. Instruction manual x1. Included LEDs are compatible with other kits that utilize circular LEDs. (immagine) Categoria: Toys and models Annullato/esaurito (Lateness)
Ordinabile fino al 07/04/17
Prezzo di copertina: USD 59,55
Prezzo HoVistoCose: EUR 81,46
Pagina del Previews (MAR/2017): 577
Data di uscita: 26/04/17 (può ritardare di 60 giorni)
Final Order Cutoff: 07/04/17 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. From the popular anime series Gundam Wing comes the Gundam Deathscythe, now a part of the HGAC line for the first time! This kit builds the very first version of Duo Maxwell's Gundam! Sliding gimmicks in the shoulder and knee armor allow for improved possibility, and you can expect significantly improved color separation over the older HG release! Accessories include two varieties of beam scythe effect parts, Buster shield blades that can move outward and inward, with optional clear effect parts, parts to recreate the stowed state of the beam scythe, and a foil sticker sheet. (immagine) Categoria: Toys and models
Prezzo di copertina: USD 19,50
Prezzo HoVistoCose: EUR 26,67
Pagina del Previews (MAY/2021): 1061
Data di uscita: 28/07/21 (può ritardare di 60 giorni)
From Bandai Hobby. The main equipment of the Gundam Astray No-Name! Can be transformed into defense, long range shooting, and neutral configurations. Includes also a wide variety of joint parts to customize on your GunPla! Runner x 3, instruction manual. (immagine) Categoria: Toys and models
Ordinabile fino al 05/10/18
Prezzo di copertina: USD 10,35
Prezzo HoVistoCose: EUR 14,15
Pagina del Previews (SEP/2018): 1067
Data di uscita: 28/11/18 (può ritardare di 60 giorni)
Final Order Cutoff: 05/10/18 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
From Bandai Hobby. Based on the Death Beast enemy units from Mobile Fighter G Gundam, this 4 legged monstrosity carries a 4-prong trident and has two types of eye sticker options. (immagine) Categoria: Toys and models
Ordinabile fino al 06/12/19
Prezzo di copertina: USD 23,25
Prezzo HoVistoCose: EUR 31,80
Pagina del Previews (NOV/2019): 1076
Data di uscita: 26/02/20 (può ritardare di 60 giorni)
Final Order Cutoff: 06/12/19 (se ordinato entro questa data - un paio di giorni prima per permetterci di ordinarlo - le possibilitĂ che l'ordine verrĂ soddisfatto sono molto alte)
$39,00
$47,63
$45,27
$14,63
$9,75
$27,75
$6,98
$6,75
$45,00
$17,25
$21,00
$20,84
$59,55
$19,50
$10,35
$23,25
